Posts

Chosen Solution هل بطارية OnePlus 6T متوافقة مع OnePlus 7 Google Translate Is the OnePlus 6T battery compatible with OnePlus 7? Hi, They are different batteries and they are not interchangeable. For a OnePlus 7 it is a BLP699 (4000mAH) and a OnePlus 6T it is a BLP685 (3700mAH). Also when looking at images of the two batteries, (see below) the flex cable connections are located in different spots so a 6T battery won’t line up with the systemboard connector in a OnePlus 7...

Chosen Solution This iMac is under 3 years old and have never been serviced. The black screen issue started when I tried waking it up from sleep. When I tried to restart it I can’t get the screen to show anything. I’ve tried resetting the NVRAM (the second chime is like coming from a tiny speaker, is this normal) and the SMC. When i tried to run diagnostics that’s the time the fan started getting loud...

Chosen Solution I fully charged my nokia - all buttons light up and keys beep and are responsive BUT the screen is black and appears dead. I have a dead screen. I have googled this issue and a number of others have had the same issue in the past but I cannot find a fix? Does anyone in cyberspace have a practical DIY fix please? thanks. Rick Cowan, the only solution I have come across on multiple forums is by placing a jumper across the capacitor C4410....

Chosen Solution Alright well today I put in my Ifixit battery and followed the instructions to a T.. No problems and everything went mostly well cept for getting the battery off the adhesive.. Anyway phone works for the most part just fine.. But the battery % doesnt change at all.. I have to restart the phone to get it to show the current battery % .. Also the blue screen of death… Sometimes it will go an hour plus while im using it before it restarts and other times it will do it again all by itself within a few min… Mind you my phone never had this problem till today....

Chosen Solution Really stressed! So my lock-button was jammed, and I was fed up of using touch assist, so I took out the screws by the charger port, and tried to disassemble the thing. Some of the black plastic internal frames snapped, and that’s all I can recall breaking! Now, when I realised how complex the inside was and gave up trying, I can’t completely re-seal the phone and it also won’t turn on!...

Chosen Solution Just installed yesterday. Seems to cool fine. Motor running constantly and every 10 seconds or so it makes a short revving sound, like when you rev your car. Sounds like a fan trying to kick into a higher gear but not making it. Very annoying and distracting when trying to watch tv in the next room. Will call for a service call because I can’t keep an appliance that sounds like this....

Chosen Solution Alright so! I don’t know if the model I put for my laptop is right I just know it’s a Samsung Chromebook and it’s old that’s it! It just randomly stopped charging, would I have to replace the charging port as a whole or can I mess around with some $@$* and fix it that way???? Hi @stinkyass , What is the model number of the laptop as as shown on the information label on the bottom of the laptop?...

Chosen Solution My electric typewriter Brother CE60 does not write certain letters. These are: comma, period, minus-sign, both accents (‘ `), and the apostrophe (‘). Otherwise it works fine. What can the reason for this be? I’d try re-seating the cable that connects the keyboard to the main board. If that doesn’t work, inspect the keyboard PCB for corrosion. I had a Commodore 64 computer with a half-dead keyboard and discovered board corrosion that I was able to jump with wire....

Chosen Solution i recently bought a used canon powershot sd 750 from ebay and am unable to turn it on. the seller indicated that the battery had been dead since 2019 so he had not used it since then, but it was in good working condition once the battery gets charged. i bought my own charger and charged the battery but the camera still does not turn on, anyone have advice?...

Chosen Solution Hi! Yesterday I accidentally crushed (with my car’s door) the upper right corner of my iPhone. The glass cracked badly but image and touch are working as nothing happend. Later I realized front and rear cameras and flashlight are not working. Before I pull the trigger, is there a way to be 100% sure that also the cameras broke? I opened the phone and reseated every connection, but I don’t want to buy the replacement cameras and screen just to realize something else is broken and the cameras are never working again....

Chosen Solution can a samsung galaxy s8 plus lcd ribbon work on samsung galaxy s8? I know the screen does not fit on the s8 phone. but is the lcd ribbon from the s8 plus work on s8 phone I just want to test to see if my s8 phone is working. Can I test my s8 phone using a s8 plus lcd screen. hi, looking at the below, it seems they both have the same connectors....

Chosen Solution My old RB 14 died months ago. had it stored since then. I just wanna see if I can use the display as an external monitor by using a display controller. I can’t seem to ID the type of pin connector it has. no info or part number in the device, just a label saying edp on the motherboard which doesn’t help much. my RB model is rz09-01652e22-msu1 the panel is the QHD+ touch 3800x1800....

Chosen Solution Toshiba satellite L875D-S7210 serial number 6C17135R can this laptop use wiFi ? From what I can find the model has Wifi capability. Source: http://gadgetaz.com/Laptop/Toshiba_Satel… Hey if your wifi is failing of nonexistant then you can try this link it’s a long one but these are pretty cheap.

Chosen Solution If I have another LG V700 tablet with a good screen and digi can I just swap it with one that has a broke screen n digi? As long as the size, model number, and all other specifications are exactly the same, the parts would be the same as well. It comes down to your ability to get the screen and/or LCD removed without damaging either. I’ve never done an LG tablet specifically but from my experience with tablets from various manufacturers, in most cases it can be done....

Chosen Solution My phone keeps clicking on stuff without me touching it, so I think my digitizer is broken. Is there any way I can fix the digitizer at home without completely breaking my entire screen? Yes, but there is only a part available for the entire screen + digitizer so you would have to replace both. Here is the part you will need: https://www.ebay.com/itm/USA-LCD-Display…

Chosen Solution After I downloaded a wireless update, I restored my phone because I keep getting a message " cant establish a reliable connection " when I am trying to sign into apps or google play store. My search internet engine works, my texting and calling works. I can connect to 4g and WiFi full bars. My date and time is correct. Also I have tried to clear my caches n data under apps Please help!...

Chosen Solution Specs Summary Display: 12.9" Liquid Retina display w/ True ToneProcessor: Apple M2 SiliconeRear Camera: 12 MP Wide and 10 MP Ultra Wide CamerasFront Camera: 12 MP TrueDepth w/ Ultra Wide Front CameraCharging: USB-C w/ support for Thunderbolt / USB 4Cellular: 5GSecure Authentication: Touch IDMax Storage: 2 TB Specs don’t help with your issue whatsoever. Are you saying Face ID has stopped working?

Chosen Solution My 2ds was working fine before that,then I updated and now, when my console is booted It shows a black screen From what your saying, It sounds like you may need to boot into GM9 (Godmode 9) and possibly restore the NAND backup you did. You could try booting into the 3DS Update Recovery mode, which is by holding A+R+L+Up and powering it on. If that fails and you have no nand backup, try updating your Luma version....

Chosen Solution My daughter’s 3DS would work fine when on charge but would die as soon as the charger was unplugged. I installed a new battery and charged. Now, it continues to work fine on the charger and die as soon as removed. I checked voltage on the battery with a multimeter and am seeing 3.7V from (+) to (-) terminal or (+) to center terminal. With new battery installed, I see no voltage across the cradle terminals....

Chosen Solution After tightening an accessory into place with the collett nut, it doesn’t grip enough, so tool such a saw just stops when pressed against object. Measure the shaft on the tool in question. It is probably 3/32” and you probably have a 1/8” collet installed in the collet nut. If you have lost that part or did not get it with the tool they are readily available on line....