Chosen Solution Just replaced my led backlights (because of blinking) and now that the blinking is gone I now have a huge vertical band near the centre? Have I damaged something? @urga check the thin ribbon cables that go from the LCD driver board to the panel. Check the ribbon that corresponds to the particular area on the screen. Press on it and see if it makes a difference. This is most likely an error with either the tab or the board....
Chosen Solution Charging the battery Check what the battery specs are listed as. It should give you ratings right on the battery itself. Even at lower voltages, it will likely still charge. Most batteries in cell phones and tablets are around 4 volts, so would likely be okay. Also make sure your current limit is set appropriately, I would start low, and once you’re sure current is being drawn into the battery, turn it up slowly....
Chosen Solution When I plug in my phone after a minute the ape logo appears then the screen goes black I have a damaged home button did anything happen physically to the phone that might have damaged the home button? honestly, no, i don’t think this behavior is indicative of a bad button (but don’t rule it out). personally, i’d start with something like itunes or 3uTools and do an IOS upgrade (without erasing any data)....
Chosen Solution I bought an iPhone 8 Plus without True Tone functioning. I am planning to buy a JC V1 programmer to restore True Tone. Are all displays programmable or are there specific displays that I need to look for? you have to the oem screen with the true tone working in order to copy the data over to the new screen with the JC V1
Chosen Solution Need to test if logic board is bad or PSU. How can I test and what are the voltages I should be looking for on this model? Thanks Download this free manual Apple leaked! iMac (Retina 4K, 21.5-inch, 2019) Repair Guide See if it offers what you need.
Chosen Solution Hi guys, is it possible to use the laptop (Asus Rog strix scar G733Q) with open panel? I am doing some mining when not using it for gaming or work and would like if you share with me how I can use it with open back panel and preferably disconnected battery. Disassembling and assembling back the laptop is not an issue. The problem is when the back panel is away from the laptop it doesn’t want to start at all....
Chosen Solution I try to charge up my ATIV smart pc 500t over night and still see no light and can not start up. please help I’ve changed the bios battery with no luck. I’ve already ordered the main battery, now waiting for the shipping from shenzen….i’ll let you all know Same problem, I think windows update bricked it, last night I’ve updated my tablet and when I woke up it wont power on, no light indicator, and it wont charge....
Chosen Solution Hi, Do you have a DMM (digital multimeter) and know how to use it? If so, disconnect the blender from the power and then connect the DMM (Ohmmeter function) across the two power pins on the power cord plug and check if there is a reading on the meter. If there is no reading then as you will have to open the blender anyway first check that the wires in the power cord have continuity from the plug to where they connect in the blender....
Chosen Solution I have a black MB 2.16GHz from 2007. When I switch it on I hear the CD drive partially engage, the fan comes on, but the screen remains black. This happens both with battery, and AC. I have to do a force shutdown by holding the power key. Usually after about 10 times of switching on/off I eventually get the apple boot screen, and then a further 10 times after I get the computer on....
Chosen Solution Hi! After I replaced old power, volume and mute button flex cable with new one and after cleaning front camera, I turned on iPhone 5 and saw black screen without Apple logo, only black shine. I tried to resolve problem by pressing power and home button but it didn’t work. I also checked connection between screen and iPhone and it is OK (cables are OK). Some connector inside the iphone is been inserted the wrong way....
Chosen Solution Hello everyone, I’ve just replaced front sensors flex cable (proximity and ambient sensors from original flex). Unfortunately I have not checked if the problem was appearing before. Can it be associated with poor soldering job with swaping sensors? FaceID, speaker, ambient sensor, proximity sensor works without any problem. I’d give the camera and camera lens a good wipe with a cleaning cloth, hopefully that should resolve the problem.
Chosen Solution It’s asking for the original account. How can I clear the old account so I can enter mine and use the phone for myself? Go to your friend and ask for your money back or have him remove the phone from his Google account.
Chosen Solution Today, I replaced the heat sink on my 13 inch mid 2012 MacBook Pro. I had some difficulty getting the keyboard cable in, but in the end I got it all the way. The keyboard worked, or so I thought. Every single key works except the control key. The key seems fine - you can press it like any other key, but nothing happens when you press it. Could I have damaged the cable?...
Chosen Solution I was replacing a noisy fan. When prying the power cable loose from the logic board, I broke the plastic base that is soldered to the logic board. Can this be repaired, or would I have to replace to whole logic board. As a side question, can you run O’k with one fan? I managed to repair mine. Buy yourself a silver conductive pen and some 2 part epoxy glue....
Chosen Solution where can i buy a replacement track piece Hi can I ask if you found extra track and where? We have bought a train but some track missing off eBay so I’m struggling to find replacements… It should be possible to make some straight track pieces from wood. Curved pieces might be a bit more challenging.
Chosen Solution I don’t use MS Outlook 2010 very often. But sometimes I have to. Today I haven’t seen any calendars in my Outlook app. If you don’t know how to get .pst file back via Scanpst then I would suggest pst repair Some of threads similar to yours http://ccm.net/forum/affich-825481-outlo… And like wiki you might be helpful the article https://www.msoutlook.info/question/690 Let’s try some steps… Open outlook in safe mode, and try to reproduce issue Run->Outlook /safe> Notes: It’ll disable most of Add-ins to test if the issue is cause by them Please try to clean up the form cache, we may receive the messages which form has been modified some times a....
Chosen Solution camera got wet in sea water no power battery charging light come on when charging Salt water will rapidly corrode and cause permanent damage in all electronic devices, do not attempt to use this unless you know it’s 100% dry as water will also zap circuits. I would suggest as this was exposed to salt water it will need to be pulled apart and cleaned as even when water evaporates salt will remain and corrosion will continue....
Chosen Solution Hi, I have an old external drive with a firewire connection which I want to attach to a macbook pro 16” 2019. The laptop has only thunderbolt 3 ports. Is there a firewire to thunderbolt 3 daptor or is it ok to use an firewire to thunderbolt 2 and then a thunderbolt 2 to thunderbolt 3? thanks Thay might work! Or get a USB-C drive case and transfer the drive over....
Chosen Solution Hello! I have a MacBook Pro (A1398 EMC 2673 (Early 2013)) with its original internal SSD. My MacBook has not been turning on for the past two days, and I want to see if the SSD still works; I thought that I would insert it into my wife’s MacBook Pro (A1398 EMC 2909 (Late 2015)), and from there, save my data onto an external hard drive. Can my wife’s Late-2015 MacBook Pro be booted up with my Early-2013 internal SSD?...
Chosen Solution Upgrade iMac for the next 64bit OS upgrade. Technically no, as the GPU your system has, does not support Metal. Even the 2011 models can’t either. But it still might be possible! Check this out: macOS Mojave Patcher Tool for Unsupported Macs As Mojave is still in a beta cycle we’ll need to wait until the official release. But there is one problem! You’ll need access to a newer Mac system to get the image file from the Apple Store when its released and then configure the installer on a thumb drive to then upgrade your older Mac....
