Chosen Solution After doing a screen repair on an iphone 7 it launched into the boot loop. I tried to restore on itunes which prompted the 4013 error. I then took it to a repair shop where we used an apple original screen with a new camera/speaker system and with a different battery, all of which continued to give the same error. I have run out of options and want to know if theres anything I can do!...
Chosen Solution I just ordered a new loud speaker for an LG V20 that was not functioning. After I installed the new speaker it still has no volume. I also hard reset it just to make sure it was not a software issue. After micro inspecting it as well I do not see anything wrong with the contact pads or any sign of damage. -reading online apparently the V20’s have a lot of issues with this so I was seeing if this has happened to anyone else....
Chosen Solution My analog stick according to my axis scanner reports that my right analog stick sits 0.20 out from center to the left. How do I fix this? I’ve done a full disassembly, iso, then lubed.. issue persists. Seems the module that’s supposed to snap it back to place hasn’t got enough tension. Any ideas? Currently thinking of replacing the entire Analog module with something from ALPS I think it’s called....
Chosen Solution after update to android 4.1.2 my galaxy ace 2 has become extremely slow, unresponsive etc.. (1) Has anyone found apps causing this following the update (2) Is it possible to increase the memory on the phone ? ( I am a trained electronics technician so can replace parts - but will the software deal with it and is a chip to replace the memory available that is of the same package type ?...
Chosen Solution Does anyone have an annoying double honk like from a car, coming out of their phone? For the life of me I cannot find which app is doing this and it is !#^&^$^ me off. Hi, i managed to put an end to the annoying car honk sound coming from my phone. The cause: I had recently installed an app called Park + which was synced with the RFID on both my cars....
Chosen Solution i rebooted my computer every way possible power option+command+p+r command+r holding down shift i even disconnected the battery I really dont wanna take it to apple because i dont have applecare. Please help? Try Shift+Control+Option+Power (credit: http://osxdaily.com/2014/11/22/fix-macbo...). This has worked for me in the past with a black screen on startup, and I think it might work for a white screen. Also, if I’m not mistaken, you can call Apple Support for free....
Chosen Solution I want more than the ‘allowable’ upgrades on my iMac 21.5 inch 4k (2019 year). I see through this site alot of people have made the following upgrades and they seem to be the best of the best. i9 9900k CPU, 1 TB SSD, 8TB HDD and 64gb RAM. I am no where near confident in doing these upgrades myself but was wondering does anyone know a place or someone who would do these upgrades that aren’t your most normal ones to do....
Chosen Solution Hello I have a client tha has a broken digitizer of a galaxy tab e t560. Since these are very new I couldn’t find any info on disassemble or even replacement of the digitizer. Does anyone has info for me on that. Thanks https://www.youtube.com/watch?v=_sQbK1On… https://www.youtube.com/watch?v=t1IzBTqI…
Chosen Solution I recently replaced a IPhone 7 plus screen with a non-oem screen. Everything went well and the phone was returned. The same day I get to hear the touch isn’t working as it should, no big deal, I’ll just replace it again. I recieve the phone a few days later, on and working, test a few things, nothing seems wrong and I turn it off. Then I remembered I forgot to test some other things and I powered it back on again....
Chosen Solution I try to repair an Apple Watch serie 5 , but some but something go wrong when I try to attach the lcd display to connector , there is a solution for know if is the lcd screen broken or the connector ? https://drive.google.com/file/d/1Y-9mF3X...https://drive.google.com/file/d/1eZnVucF...https://drive.google.com/file/d/1eawCLGr… Sadly your OLED display is damaged! It looks like you had a hard time getting it off as the displays edge looks damaged, but the worse is the damaged connector on the backside....
Chosen Solution Hi, my audio internal sound has fried. Do you sell the audio card with the audio jack? Sadly the headphone jack and the audio logic are all part of the main logic board. So unless you have a plug stuck inside or the switches inside are damaged You’ll need a new logic board MacBook Pro 15" Retina Display Mid 2015 Logic Board Replacement Your other option is to use an external USB DAC unit....
Chosen Solution My issue is a bit different. Sound, amblight and picture is ok but backlight turns off any time in an hour. İt happens after picture is displayed from any source. If no picture then no problem. Changing tv may be better then change main board. Güncelle (21-03-2022) Serkan Atan once the screen turns dark and you continue to have audio, shine a flashlight beam at an angle against the screen ....
Chosen Solution Need help with this one I have just replaced battery in iPhone X Right after replacement battery health was 100% after a day of using it it’s shows. Is because 3rd party battery or is there another issue, defective battery etc? Please see attachments Some third party batteries have a tendency to do this or even the phone can detect if you replaced the battery. Where did you buy your replacement from?...
Chosen Solution My macbook pro 16" powers on into a blank screen. I can adjust the brightness but no apple logo. It can output to external display. Sound, keyboard and touchbar are also working fine. What could be the issue here? Do I need a new lcd display or a new logic board? Place a flashlight against the screen at a sharp angle, do you see a faint image of your desktop and its icons?...
Chosen Solution My fret button pad broke inside the guitar (only the yellow fret) and now it is always pressed in the game. Do you know how to get a new one fret button pad? Thanks. El pad interno dentro de la guitarra se ha roto (especificamente el del boton amarillo) y ahora aparece siempre presionado en el juego. Sabeis como conseguir un nuevo pad? Gracias. Buenos días hermano, cuando dices pad ¿te refieres a la membrana de color gris oscuro de la tarjeta (PCB)?...
Chosen Solution Hi. Very, very limited understanding of the correct jargon and how things function, but was hoping someone might have an answer for me. I’d had some issues with overheating, noise, etc, recently and decided it was time to buy a new battery (after five years). I did so through this site (the Australian version for reasons of geography) and seemed to manage to follow the instructions correctly. I hope....
Chosen Solution The J key stopped working on my MacBook pro as it did many times in the past. I initially set the MacBook on its side and sprayed the keyboard with compressed air. No dice. I took off the keycap by inserting a bit of plastic at the top and being careful not to break it. I once again set the MacBook on its side and started spraying air. I probably got a bit too eager with it, because this little bit of what looks like a black sticker came flying off....
Chosen Solution Hi, i have replaced a new lcd screen to the front metal plate on my Iphone 6 , but unfortunately i damaged some of the small little plugs on the connector on the home button when i loosened it. So my question is , is it possible to loosen the broken connector on the home button and buy a new contact so the fingerprint scanner can function again. Someone who has such a guide to refer to ?...
Chosen Solution Possibly unrelated, but after changing the front panel on my iPhone 6, the camera flash (not the camera itself) turned on for a split-second the first time I tried it, then went back off, almost as if it “burnt out.” Nothing I’ve tried has remedied it (restores, letting it sit without battery connected for a week). I know it’s an LED so the flash itself probably hasn’t burnt out, but is it possible I could have damaged a filter or something along the way that could cause this?...
Chosen Solution Power cord mistake?? Hi, What is the make and model number of the soundbar? Most probably the power board (or the power input section of the motherboard) has been damaged by the connection of the incorrect voltage supply. You will need to open the soundbar and the check for any damage, such as blown fuses or surge suppressors and burnt out components etc. Search ifixit for your make and model soundbar to check if there are any repair guides available that may help....
