Chosen Solution The front glass of my iPad is broken. Otherwise it is working very well. Is it possible to replace only the front glass? Yes, the digitiser and LCD are separate on iPads, however some newer models without Touch ID has the home button soldered in place, this can make repairs a little more difficult. There are very good guides for all iPad models on iFixit.
Chosen Solution I am now on my way to my first solder on a MBP logic board to bring back the backlight on my display. Logic board is 829-2565-A. MacBook Pro 13" mid-2012 i7 2.9ghz. I accidentally dropped something on the board while fixing the hinges and have no backlight since then. Through multiple searches on google I found it may be caused by a blown out “P” fuse near the LVDS connector....
Chosen Solution So this tv, older. vizio gallevia was getting digital channels on antenna for awhile then we moved it to another room and it had cable. Now its back in bedroom and we are trying to switch it back to broadcast antenna. But when we choose input and tv go to menu on remote we choose air and then auto search and it will only search analog. digital will not scan....
Chosen Solution Подскажите где качественно отремонтируют Apple Iphone? Google translate: Tell me where will Apple Iphone be repaired with high quality? Вам следует попробовать обратиться в авторизованный сервисный центр Apple. Несколько лет назад мне понадобилось новое зарядное устройство для iPhone, и я отправился в re: Store в одном из торговых центров. Вы пробовали их? You should try going to an authorized Apple service center. A few years ago I needed a new iPhone charger and went to re:Store at one of the malls....
Chosen Solution Is Grand Cherokee Laredo considered jeep WJ also? Yes. This model is also known as Jeep WJ. The Laredo became the base model of the Grand Cherokee starting in 2014.
Chosen Solution So I recently purchased a 4th Gen iPod Nano and plugged it into my pc to do a wipe and fresh install. However when I plug it into the computer, it causes iTunes to freeze until I unplug it. Then iTunes works just fine. I’ve tried different cables as well as usb ports and nothing seems to work. The device charges off of plugs just fine and works with the music that is already on it, but will completely lock up iTunes if I try to hook it into my pc....
Chosen Solution My laptop has a problem were when i plug it in the charging light comes on and then i turn it on. Then after like 10 seconds, a notifacation pops up and it says that the fan isn’t working properly and that the laptop neds to shut off immediatly How can I fix this? You should first clean the fan from all dust. If that didn’t work you should replace it....
Chosen Solution My tablet window 8 is damaged and I try to recover I could not do any thing for it I lost the desktop of it what I want is to re format it but I could not do that it need the system usb witch have window on it and I try my best to get window 8 download but I fail to do it so I need your help my email : Tsrwat@mail....
Chosen Solution I had to replace the led strips in my television and once I put it back together I had this problem. The screen is now damaged. This TV cannot be repaired cost effectively, but you can sell the TV boards inside of the TV on eBay or a similar place. The LCD (screen of the TV) is very fragile and must be treated with care. It can be damaged from sharp objects, falls, or resting the wrong way on something like a table....
Chosen Solution I have a GTX 1050 (not Ti) which is showing blank screen. Looking at the pcb, it looks like some of the resistor/caps smds have been knocked off so any ideas what they could be? Have attached a very high rez image. Ignore the slight wonkiness as its a stitched together image. Have circled and numbered where I’ve spotted missing components. Image of GTX 1050 board. Help appreciated!...
Chosen Solution Hello I have a [problem with surface pro at pwer on it shows -surface- then black screen shows up I can not do anythin more is any way to reset to original set up? Hi Ivan, I’ve had that same issue with my Surface Pro RT tablet. Plug the tablet in, and let it charge, then hold down the power button for an extended period, it should bring you to a blue screen....
Chosen Solution My laptop was working fine, then it got stuck on a boot up loop.. I’m stuck advanced options menu, but I can’t use any of the options due to not enough storage! Any help would be great! I would recommend going into the windows repair settings, and fully erasing/resetting the computer. If you are not able to do that, then here is what you must do: Go here: https://www....
Chosen Solution I have a iPhone 7, when I call someone they can hear me clear but sometimes I can’t hear them, there voice is distorted like a robotic voice. Sometimes bad signal and 4g often changes to 3g. I just changed from an iphone 6 to this 7. When you say you just changed from the 6 to the 7, this is a brand new 7 or was it a hand me down or used 7?...
Chosen Solution I have replaced the battery on my macbook pro A1150 twice each time the battery works as normal for about a month before I get the “Not Charging” message. The computer works fine when plugged in - the magsafe light is usually dim green but occasionally bright green. Once unplugged the computer instantly dies. Magsafe works on other macbooks without issue, so don’t think the problem lies there and not sure what the odds are of getting two new batteries both duds on delivery....
Chosen Solution How can I get the battery Percentage of the Soundbot BT speaker SB571 displayed on the Android OS device… Or can anyone help me how the LED Indication is there for Full charge and Discharge Hi, According to the User Guide the LED indicator will turn red when it is being charged and turns off when it’s fully charged. Here is one app that might be able to give you the battery status information....
Chosen Solution I have started soldering today and needing help on this because this is very new to me. I am trying to learn new skills Hi Soldering is loads of fun(in my opinion) and I got good at it just by playing around and trying new things Here’s some tips! 1)practice on other broken things 2)use a quality solder,flux and iron:in my opinion it’s much harder to learn if you are using tools that don’t do the job properly so make sure you are using stuff from reputable brands or places that have a good reputation like iFixit,Amtech,hakko and lots of other brands 3)practice regularly:just like everything else Practice makes perfect,most people come up with techniques that work for them as most of the time there isn’t a wrong way of doing it as long as it works 4)if you get stuck ask plenty of questions!...
Chosen Solution Phone was not charging through usb so i ordered a usb charging port from eBay. My husband opened it up and he was having done problems with the glue..so he thinks he might have tore something up….but not sure He closes it back up…. and the usb charging works…. the phone was charging but then we realized the screen was black, nothing showing but i hear the voice assist....
Chosen Solution Hello here have a problem with my Asus K53S Laptop…It ran to blue screen death when it is using.Some times AutoCAD or like application and think it is about the graphics issue, but cant have to correctly identify that so please help me to fix it..It have Windows 7 64bit OS with i5 processor and Intel graphics as 1.6gb (64mb dedicated) and nvidia Geoforce GT630M graphics (Driver Version: 9....
Chosen Solution I tried sevral bluetooths using with my phone, but all of them has static i hear with a loss of connections in it. can you please suggest anything? Any solution? Not sure if it is my samsung gear circle or phone.
Chosen Solution Hi, recently i have been repairing the screen on my iPhone 7, and i am onto the second screen because the first one i snapped the touch id cable on the screen itself ( near where it connects to the phone ) and i recived my second screen today ( from the same supplier ) and have done the same thing again, in almost the same spot, it happens when the screen is fully assembled and being installed onto the phone and im trying to clip the screen back in, my question is, is it low quality screens Or is it just my fault that im snapping them?...
