Chosen Solution
If the glass of my Lumia 830 it’s broken but the LCD works perfectly can I just buy the digitizer (Glass) instead of all the display part (Which is much more expensive) and replace it? For example, in the Lumia 1020 you cant do this because the LCD and digitizer are fused together.
Hi.yes its possible but you need preheating machine and some wire and UV glue…so if you never did it before i dont recomend its much better to buy complete LCD it is a litlle bit more expensive but at least you will be sure that its ok…:)
yes its very possible.. you just need to heat up the complete Digitizer and the LCD screen to separate them apart.. you may use hair dryer to to heat up the edges of the compete assembly (to weaken the glue) then separate them apart (just have to be careful not to over heat them) … apply the heat from the top, thus on the Digitizer…
Of sure you can do it but i really don’t recommend it. The glass is glued to the LCD with a LOCA glue (it’s a UV sensitive glue) so you need specific instruments to disassemble it from the LCD. Actually you need: high temperature air heatercutting wirea new glassa new LOCA gluean UV lamp (the one for the manicure is perfect) Personally, I did the same work for an old Samsung GS3 and i really had some troubles disassembling the glass from the LCD (the LOCA glue is SUPER STRONG so you need to heat the surface A LOT). MY advice is to spend some money and buy a pre-assembled LCD+GLASS module
unfortunately no, there a fused to the LCD as a one piece part
