Chosen Solution
I own mid-2010 27” iMac While attempting to do the HDD swap, I broke the LCD temp port that’s attached to the logic board, and now the cable doesn’t connect properly. As a result, the fan is going maximum. The sensor cable is fine, it’s that port on the logic board that’s broken. What’s the part number for this part and what would be the best way to fix this?
Ji Woong You, Did you find a solution to the broken connector? I have the same issue. I need the connector, 2 pin that mounts to the logic board and mates with the LCD temp sensor cable here is the part number for the cable, but I need the mating connector part number(connector solders onto the logic board). IDENTIFYING NUMBERS Apple Part #:922-9623 Printed Part #:593-1229-A thanks, Lonny Update (08/02/2018)
attach image of connector
You might try just soldering the wires directly back onto the board. That should make things work again simply.
Ji Woong Yu, Resolder the connector using my guide I developed for the fan connector: I popped off the fan connection from the logic board…Fix? For my tutorial on resoldering the fan connector, it’s not too different. Take your time and follow my instruction.
